Do you have trouble getting online? How fast is your connection speed? Why can’t you watch Netflix in every room? If that’s the case, you’re probably doing all you can to find a way to restore your connection. Despite being one of the greatest WiFi devices, the Netgear AC1200 might sometimes surprise you with its subpar performance. There might be a wide variety of causes for AC1200’s lack of performance. If you’re having trouble accessing the internet with your AC1200 despite achieving setup success via 192.168.1.1, this page has some solutions you may try. Come on, then, and we can begin.

Netgear Router Internet Connectivity Issue Reasons

  1. Get Rid of Signal Interference

When setting up the Netgear AC1200, it’s important to place the router in an area free of any signal blockers. Most users, however, don’t give much thought to this and instead position the router wherever a suitable outlet happens to be.

Keeping a suitable distance between your AC1200 and interference-causing devices is recommended if you don’t want your router to break internet access sometimes. The signals of your device may be disrupted by things like metal studs, fish tanks, microwaves, baby monitors, and reflective surfaces like mirrors and glasses. If you’re using a WiFi router, move all of these things away from it.

  1. Check the Access Point

Whether you’ve set up an Ethernet cable between your modem and AC1200 router, this connection is considered access point. Switch to fresh Ethernet cable immediately if you detect any damage to the ones you’ve been using.

After that, you may make your client device access the network of the Netgear AC1200 wireless router and see whether the internet is operating properly.

  1. Reboot the Netgear Router

Rebooting the router might sometimes restore internet connection. Your devices may be jolted back into proper operating order with a simple restart.

All you have to do to do a power cycle is to remove the plugs from your electronic devices and then put them back in after a short while. Remember to check that your devices are receiving a stable and enough power supply after the operation is complete.

  1. Update the Router Firmware

Another thing that can be done from your end to fix the issue at hand is to update the firmware of your Netgear AC1200 router. Thus, either use the Manual method or the Nighthawk app to perform Netgear router firmware update.

  1. Perform Netgear Router Setup

Disruptions in internet connection may be the result of a number of factors, including incorrect settings. It’s best to get assistance if you’re not very tech-savvy and aren’t familiar with all the processes involved in getting your router up and running. You may set up your AC1200 yourself by consulting the Netgear router user manual that came along the router at the time of purchase.

  1. Perform Factory Default Reset

If your AC1200 is still having trouble accessing the internet after implementing the aforementioned troubleshooting hacks, you may want to try resetting the router.

It’s important to remember that this will reset your AC1200 router to its original factory settings, so you shouldn’t start unless you’re OK with that.

The Netgear AC1200 router may be reset by pressing and releasing the Reset button with a pin or similar tool. After that, go to the mywifiext.net login page to change the settings on your WiFi range router. If you face the routerlogin.net not working issue while doing that, access the default IP address instead.

Final Note

It’s annoying when your internet connection drops every few minutes. Surely this article provided you with the troubleshooting hacks to fix the Netgear AC1200 router internet connectivity issue.

Which was the hack that you found the most useful? Want to share it with your fellow readers? Well, you have the option of doing that via the comment section.

About Author