Today’s article will discuss how to fix the Canon Error 5200. This error is most common when ink levels drop or the cartridge becomes damaged. Canon printers are among the most trusted on the market. This means that there are very few errors reported by users. We will discuss them all. Let’s first look at the possible causes of this error.

1. Your cartridge could have a problem
2. The logic board of your printer may be damaged
3. Your cartridge has low ink
4. It is possible that the black ink was not properly placed
5. Let’s now look at the possible causes of this problem.

Fix Canon Printer Error Code 5200

These are some solutions to fix Canon printer error 5200

Refill your cartridges/ink tanks

Get rid of all the print junk!

Reset the printer manually to its default settings

1] Refill your cartridges/ink tanks

First, take a look at the levels of black ink and colored ink on your cartridges. If the ink is not sufficient, refill them. You may see the error again if you don’t fill both the black cartridges and the colored ones.

2] Make sure you clean up your print head

You may have stained your print heads or cartridges when you face this error. If this is the case, you should clean your Print Head.

First, unplug the power cord to your printer and let it run for a while.

Clean the cartridges from the printer.

To verify that the problem has been solved, place them in the printer again.

You May Also Like: What settings can shroud use Valorant?

3] Reset the printer manually to its default settings

You can also reset the printer’s factory settings to fix the problem. To do this, follow the steps below:

If your printer is active, press the “On” button to turn it off.

After the printer turns on, wait for it to power off. Next, press both the ‘Stop” and ‘On’ buttons simultaneously. After waiting for the https ij start cannon printer to turn on, hold down the ‘Stop” button and ‘On’ buttons simultaneously for three seconds. Then, release your finger from ‘Stop.

Continue pressing the ‘On” button, and then press the “Stop” button five times every two seconds. The yellow icon will light up each time you press the Stop button.

Now, release all buttons. The LCD of your printer will turn on, but it will remain blank for now. This is the indication that your printer’s software has been initialized. Your ‘On’ button blinking will accompany this.

When it stops blinking, you can press it one more time to turn off your printer

Clean out the cartridges in your printer. Turn on the printer and place them back. The problem should be resolved by setting up your printer.

Why is my Canon printer not printing black ink?

Printer companies also make this mistake often. They can’t print on paper with the black ink cartridges. This is usually caused by a clogged nozzle on your printer, which prevents it from printing black ink. This issue can be fixed by using the built-in tools of your printer. Locate Maintenance and choose Deep cleaning.

We hope we were able solve your problems with your printer.

Conclusion:

Canon printers are among the most trusted on the market. Let’s first look at the possible causes of this error. First, take a look at the levels of black ink and colored ink on your cartridges. You may have stained your print heads or cartridges when you face this error. If this is the case, you should clean your Print Head. You can also reset the printer’s factory settings to fix the problem. After the printer turns on, wait for it to power off. Then, release your finger from ‘Stop. Continue pressing the ‘On” button, and then press the “Stop” button five times every two seconds.